Measurement

RST has the largest system resources in the Nordic region to measure and collect all necessary information about roads, cargo areas, ports and airports.

Raptor - The future of the structural pavement evaluation

The Raptor is Ramboll’s newest product. Ramboll acquired the entire Raptor project from Dynatest in 2020.

Instead of just getting spot checks which is the normal situation when using the FWD for bearing capacity measurement, the Raptor provides a continuous stream of data describing the structural condition of pavements. The advantage of continuous data as opposed to measurements taken in discrete points is that the entire length of pavement is scanned thus weak spots and discontinuities can be detected.

Raptor can measure 150-400 kilometers per day making it feasible to scan an entire highway network in weeks. Raptor can also be used at project level.

:

Raptor measures at normal traffic speeds without the need for traffic management, making the operation safer. The vehicle is sufficiently small and maneuverable that it can be used even in cities.

or contact:

Martin Wiström
Head of Department
Phone: +46 708 25 34 31
martin.wistrom@ramboll.se

For more information about the RAPTOR read here (PDF)

  • Road surface measurement

    contact:

    Magnus Pettersson
    Team Leader
    Tel: +46 76  816 20 28
    E-mail: magnus.pettersson@ramboll.se

    For more information about road surface measurement, read here (PDF)

  • Mobile Mapping – Digital twin

    The road area is captured by laser scanners and 360-cameras. The resulting laserscanned point cloud and photos are used as base for a digital twin which provide impprtant client value in asset management, inventory, mapping, 3D-modeling, digital on-site- visits and visualizations.


    contact:
    Magnus Pettersson
    Team Leader
    Tel: +46 768 16 20 28
    E-mail: magnus.pettersson@ramboll.com

    For more information about mobile mapping read here (PDF)

  • Functional check of road marking - RMT

    A good road marking increases road safety. Regardless of the darkness and rain, road users should always be sure where the white lines are. Ramboll RST - RoadMarking checks large parts of Scandinavia's road markings to ensure that the function meets the requirements.


    contact:
    Mikael Wendel
    Team Leader
    Tel: +46 70 309 84 00
    E-mail: mikael.wendel@ramboll.se

    For more information about functional control of road marking read here (PDF)

  • Georadar (GPR)

    Ground Penetrating Radar (GPR) provides an image of ground conditions and characteristics. GPR is a continuous and non-invasive method that makes it possible to locate and categorize the road into sections with similar characteristics and conditions.


    contact:
    Calle Ossbahr
    Department Manager
    Tel: +46 70 938 19 17
    E-mail: calle.ossbahr@ramboll.se

    For more information about GPR read here (PDF)

  • Road Core Sampling

    RST-P is a uniquely effective method for the sampling of different material layers of the road. It can be used in the inventory of existing roads, the control of contracts, simpler geotechnical samples and the environmental sampling.


    contact:
    Calle Ossbahr
    Department Manager
    Tel: +46 70 938 19 17
    E-mail: calle.ossbahr@ramboll.se

    For more information about road core sampling read here (PDF)

  • Falling weight Deflectometer (FWD)

    For more information please contact:

    Calle Ossbahr
    Department Manager
    Tel: +46 70 938 19 17
    E-mail: calle.ossbahr@ramboll.se